Skip to main content

Field-tested DAS components for multi-operator and VIRVE networks.

Explore products

Local warehouse

Express freight in a few business days — straight to the install site if needed.

ST 625.10-aligned

All components meet or exceed the performance minimums defined in the latest guidance.

From installers, for installers

BDC is the component line Bandercom Oy, a network contractor, developed for itself. So we install what we sell.

Featured products

View all products

BX-DIP-DC38-43F

Combiners

Diplexer DC–490 / 694–3800 MHz

Broadband diplexer combines bands DC-490 MHz (Port1) and 694–2700 MHz & 3300–3800 MHz (Port2) into one output port (Port3)

DC – 3800 MHz≥ 21 dB RL

BX-HC-22-43F

Combiners

2×2 Hybrid Combiner

Two-input, two-output broadband hybrid combiner, frequency range 380–3800 MHz.

380 – 3800 MHz≥ 21 dB RL

BX-PT-10-43F

Splitters

Asymmetric Power Splitter 10 dB

10 dB Asymmetric Power Splitter (Tapper) for network distribution, frequency range 380–3800 MHz.

380 – 3800 MHz≥ 21 dB RL

BX-TL-010-43M

Terminations

Termination Load 10 W

10 W RF termination for the 380–3800 MHz range, for closing off unused ports.

380 – 3800 MHz≥ 21 dB RL

Introducing the BDC 4×4 hybrid combiner

BX-HC-44-43F 4×4 hybrid combiner, rendered view with eight 4.3-10 connectors

BX-HC-44-43F

  1. 1Wide 380–3800 MHz frequency range.

    Covers the common in-building technologies from TETRA to the 5G mid-bands.

  2. 2Eight 4.3-10 female connectors, IEC 61169-54.

    Low-PIM 4.3-10 female connectors with an internal seal. PIM ≤ −160 dBc, typical −163 dBc.

  3. 3Port-to-port isolation ≥ 28 dB.

    High isolation across the whole band limits crosstalk between ports.

  4. 4Label and QR.

    A clear, serial-numbered label gives the essentials at a glance. The QR code opens the model's datasheet.

  5. 5IP65, 400 W.

    IP65 enclosure, 400 W average power handling. Fits a technical room, a car park or the outdoors.

  6. Download datasheet
Bandercom engineer running distance-to-fault analysis on a Rohde & Schwarz analyzer

Return Loss (S11) sweep on a live install.

Final inspection is a bad place to learn.

Every contractor who's been around long enough has done it — tracked down and swapped components already on the wall. We have, certainly. BDC is built to clear PIM, DTF, and every S-parameter test with comfortable margin.

Need components for a project?

Talk to BDC about your DAS spec

Send us your requirements — we'll match the right components and get a quote out fast.

Request a quote