BX-CN-78-43M
Coming soon4.3-10 Male Connector for 7/8" Cable
Low-PIM 4.3-10 male connector for 7/8" corrugated cable, DC–12 GHz, IP68.
Datasheet rev. B · updated 6 November 2026
Specifications
| Performance | |
|---|---|
| Frequency range | DC–12 GHz |
| VSWR | ≤ 1.20 ≤ 1.10 @ DC–3 GHz, ≤ 1.20 @ 3–6 GHz |
| PIM | ≤ −163 dBc IM3, 2 carriers × 20 W @ 900 MHz |
| Impedance | 50 Ω |
| Mechanical | |
| Connectors | 4.3-10 Male (IEC 61169-54), for 7/8" cable |
| Environmental | |
| Ingress protection | IP68 |
| Operating temperature | -40 – 85 °C |
Selection and use
4.3-10 connectors are fitted to the ends of 7/8 inch trunk cable. Component ports are female, and the trunk cable usually connects to them through a jumper cable with a male connector at both ends. That is why the trunk cable end almost always gets a female connector. The jumper takes the mechanical strain of the stiff trunk cable off the component connector, which also protects the PIM level of the joint.
The connector interface covers DC–12 GHz, but the cable limits the assembly's frequency range: 7/8 inch cable is typically usable up to about 5 GHz. PIM is ≤ −163 dBc with 2 × 20 W carriers at 900 MHz. The connector only reaches its PIM level when the cable is cut and the connector fitted according to the instructions. Ingress protection is IP68 when mated.